Insights

ISASecure and IEC 62443, explained with the numbers

What each certification program actually evaluates, how the security levels and device types change the scope, and where the common points of confusion come from — written by the assessors who run these evaluations.

Filteractive

15 articles match your filters

ACSSAIntermediate

After the certificate: ACSSA surveillance in years one and two, recertification in year three

How an ISASecure ACSSA certificate stays valid: 36 months, surveillance in years one and two, recertification in year three, nonconformities and suspension.

Sep 8, 20269 min readRead
ACSSAIntermediate

IEC 62443-2-1 audit evidence in an ACSSA evaluation: documents, interviews and inspection, never testing

How an ISASecure ACSSA evaluator gathers evidence on an installed IACS: documents, interviews and configuration inspection, never testing or device access.

Sep 8, 202610 min readRead
ACSSAIntermediate

The ACSSA assessment process: four phases and the report you receive

How an ISASecure ACSSA evaluation runs: the plan you approve, the four ACSSA-304 phases from risk assessment to report, and how to read the ACSSA-303 report.

Sep 8, 20269 min readRead
ACSSAIntermediate

An asset owner's installed IACS: IEC 62443 asset owner certification scope under ISASecure ACSSA, and the six documents that define it

ISASecure ACSSA certifies an asset owner's installed IACS, bounded by six change-controlled documents: who may apply, what is in scope and what is carved out.

Sep 8, 20269 min readRead
ACSSAIntermediate

IEC 62443-2-1 maturity level 2 vs 3: why ISASecure ACSSA certification needs level 3 on every requirement

In ISASecure ACSSA, maturity level 2 means a requirement is documented and level 3 means it is practised. Certification needs level 3 on every requirement.

Sep 8, 20268 min readRead
ACSSAIntermediate

IEC 62443 target security levels in ACSSA: the asset owner's level decides what is checked, and nothing is awarded

How ACSSA uses each zone's target security level from the asset owner's IEC 62443-3-2 risk assessment to decide what is checked, and why no level is awarded.

Sep 8, 20268 min readRead
ACSSAIntermediate

Service providers in ACSSA: IEC 62443-2-4, delegated tasks and the VIC shortcut

How ISASecure ACSSA evaluates an asset owner's service providers against IEC 62443-2-4: who counts, delegated tasks, the agreed list, NR-A and the VIC result.

Sep 8, 20269 min readRead
ACSSAIntermediate

ACSSA evaluation results: ten result types, and the one that fails

ACSSA records ten result types across four IEC 62443 parts. Only Not met fails; three others pass only with approved documentation; unsampled zones get none.

Sep 8, 20268 min readRead
ICSAIntermediate

The Security Maintenance Audit: how an ISASecure ICSA certificate stays valid

How the ISASecure ICSA Security Maintenance Audit works: four IEC 62443-4-1 requirements, four topics, when audits fall, findings, suspension, withdrawal.

Sep 8, 20268 min readRead
SDLAIntermediate

SDLA certificate validity and recertification: how an ISASecure SDLA certificate is kept

How long an ISASecure SDLA certificate lasts, 36 or 12 months, how a recertification audit renews it, and why the scheme has no surveillance or suspension.

Sep 8, 20268 min readRead
SDLAIntermediate

IEC 62443-4-1 defect and update management: the SDLA practices product certifications come back to

How ISASecure SDLA evaluates IEC 62443-4-1 defect and update management: 15 rows, most seen only in the process audit, and the four requirements ICSA revisits.

Sep 8, 20269 min readRead
SDLAIntermediate

IEC 62443-4-1 security guidelines and hardening: the SDLA practice with the most minimum requirements

ISASecure SDLA and the IEC 62443-4-1 security guidelines practice: 7 requirements, 17 rows, 10 minimum requirements, no mandatory artifacts, examined twice.

Sep 8, 20269 min readRead
SSAIntermediate

One certificate, several levels: how ISASecure SSA assigns a capability security level per zone

How ISASecure SSA assigns an IEC 62443 capability security level to each zone of a system, why one certificate can carry several levels, and how to specify it.

Sep 8, 20268 min readRead
SSAIntermediate

How to read an ISASecure SSA certificate and report: zones, levels and user-enforced mitigations

How to read an ISASecure SSA certificate and its SSA-303 report: capability levels per zone, the ten report sections, and the mitigations the user must apply.

Sep 8, 20269 min readRead
SSAIntermediate

A system as sold: IEC 62443-3-3 system certification scope under ISASecure SSA, and what falls outside it

ISASecure SSA certifies a control-system product as sold, at a version, in a fixed or scalable layout: the four eligibility criteria and what falls outside.

Sep 8, 20268 min readRead

Have a product or system to certify?

Talk to the assessors who wrote these articles about what applies to you.